PTC04-DB-91209 ptc04 daughter board for mlx91209 PTC04-DB-91209 datasheet rev. 1.0 page 1 of 8 4/28/2011 features and benefits ptc04 interface board for programming mlx91209 devices. applications experimental tool for lab and prototyping production equipment for serial programming ordering information part no. description PTC04-DB-91209 daughter board (pcb + rear panel ptc04) accessories part no. description dll?s for all supported products user interfaces for supported products firmware for supported products
PTC04-DB-91209 ptc04 daughter board for mlx91209 PTC04-DB-91209 datasheet rev. 1.0 page 1 - 2 of 8 4/28/2011 table of contents features and benefits .............................. ................................................... .......................................1 applications ....................................... ................................................... ..................................................1 ordering information ............................... ................................................... .......................................1 accessories........................................ ................................................... ..................................................1 1. board description .................................. ................................................... ....................................3 1.1. b oard l ayout ................................................... ................................................... .........................................3 1.2. b oard s chematics ................................................... ................................................... ..................................4 1.3. a pplication c onnectors ................................................... ................................................... .......................5 1.3.1. d sub 15 connector ? con3.......................... ................................................... .....................................5 1.3.2. screw terminals - con7, con8, con9, con10.......... ................................................... ......................5 1.3.3. force / sense jumpers ? j1......................... ................................................... ..........................................6 1.4. d aughter board c onnectors ................................................... ................................................... ..............6 1.4.1. digital db connector (40 pins)..................... ................................................... ......................................6 1.4.2. analog db connector (48 pins)...................... ................................................... .....................................7 2. disclaimer ......................................... ................................................... .............................................8
PTC04-DB-91209 ptc04 daughter board for mlx91209 PTC04-DB-91209 datasheet rev. 1.0 page 3 of 8 4/28/2011 1. board description 1.1. board layout part description con3 d-sub application connector con7-con10 screw terminals application connectors j1 jumpers to short-circuit the force and sense lin es
PTC04-DB-91209 ptc04 daughter board for mlx91209 PTC04-DB-91209 datasheet rev. 1.0 page 4 of 8 4/28/2011 1.2. board schematics led2 kp-2012src led7 kp-2012src led6 kp-2012src led5 kp-2012src led4 kp-2012src led3 kp-2012src r2 1k r3 1k r4 1k r5 1k r6 1k r7 1k c2 100n c1 100n 8 15 7 14 6 13 5 12 4 11 3 10 2 9 1 mh con3 con_dsub15_f_90 1 18 gnd common 10 u1a uln2803afw 2 17 gnd common u1b uln2803afw 3 16 gnd common u1c uln2803afw 4 15 gnd common u1d uln2803afw 5 14 gnd common u1e uln2803afw 6 13 gnd common u1f uln2803afw 7 12 gnd common u1g uln2803afw 8 11 gnd common 9 u1h uln2803afw dgnd iodrv_0 led8 kp-2012src r8 1k iodrv_1 iodrv_2 iodrv_3 iodrv_4 iodrv_5 iodrv_6 iodrv_7 f8 f9 fa fb fc fe fd ff +5v_d dgnd +5v_d dgnd dgnd agnd agnd i_sense_pps1 acomp0 +36v v_pps1 v_pps2 v_pps3 v_pps4 +2.5vref mlp1 mln1 a0 a1 a2 a3 a4 a5 a6 a7 d0 d1 d2 d3 d4 d5 d6 d7 rd wr rst scl sda f8 f9 fa fb fc fd fe ff pe0 pe1 pe2 pe3 pe4 pe5 pe6 pe7 +5v_d agnd acomp1 acomp2 acomp3 i_sense_pps2 i_sense_pps3 i_sense_pps4 mlp2 mlp3 mlp4 mln2 mln3 mln4 dgnd 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 con2 con_header_2x20_m_00 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 42 44 46 48 41 43 45 47 con1 con_header_2x24_m_00 rxd txd pe2 pe3 m2s s2m must0 must1 v_pps1 v_pps2 v_pps3 v_pps4 agnd acomp0 acomp1 acomp2 acomp3 sda 5 e2 3 e1 2 scl 6 wc 7 vss 4 vcc 8 e0 1 u3 m24c02-wmn6 sda scl i pwr i pwr i pwr i pwr 1 2 3 4 5 6 7 8 9 con5 con_header_1x9_m_00 1 2 3 4 5 6 7 8 9 con6 con_header_1x9_m_00 vdd_die vdd_sense_die out_die1 out_sense_die1 gnd_die gnd_sense_die out_die2 out_sense_die2 must_die1 m2s s2m vdd_sense_die out_sense_die1 out_sense_die2 v_pps1 3 1 2 q1 fdn335n agnd iodrv_6 3 1 2 q3 fdn335n agnd r11 300r +5v_d rxd txd gnd_sense_die gnd_sense_die gnd_sense_die dbtest agnd led1 kp-2012src r1 1k 2 3 rel1a rel_1a_pick_112 4 1 rel1b rel_1a_pick_112 rxd txd 2 3 rel2a rel_1a_pick_112 out_die1 4 1 rel3b rel_1a_pick_112 out_die2 vdd 12 a0 1 en 2 s1 4 s2 5 s3 11 s4 10 a1 14 gnd 13 vss 3 d 6 u2 adg1204yru agnd +12v v_pps2 v_pps3 v_pps4 must m2s s2m must0 must1 must0 must1 d1 bzv55/c12 agnd r9 4k7 +36v i pwr i gnd i pwr i gnd agnd 1 2 3 4 5 6 7 8 j1 con_header_2x4_m_00 vdd_sense_die vdd_die out_die1 out_die2 gnd_sense_die gnd_die out_sense_die1 out_sense_die2 1 2 3 con8 1 2 3 con7 vdd_die vdd_sense_die out_die1 out_sense_die1 gnd_die gnd_sense_die out_die2 out_sense_die2 m2s s2m 4 1 rel2b rel_1a_pick_112 2 3 rel3a rel_1a_pick_112 2 3 rel4a rel_1a_pick_112 4 1 rel4b rel_1a_pick_112 2 3 rel5a rel_1a_pick_112 4 1 rel5b rel_1a_pick_112 must_die2 must_die1 must_die2 must_die1 must_die2 3 1 2 q2 fdn335n agnd r10 1k +5v_d dbtest 1 2 3 con10 1 2 3 con9 4 1 rel6b rel_1a_pick_112 2 3 rel6a rel_1a_pick_112
PTC04-DB-91209 ptc04 daughter board for mlx91209 PTC04-DB-91209 datasheet rev. 1.0 page 5 of 8 4/28/2011 1.3. application connectors 1.3.1. d sub 15 connector ? con3 pin name description 1 vdd_die supply (single and double die) 2 out_die1 output of die 1 3 out_die2 output of die 2 4 gnd_die ground (single and double die) 5 must_die1 must of die 1 6 nc not connected 7 nc not connected 8 s2m slave ptc04 to master ptc04 communication lin e 9 vdd_sense_die sense line for the supply 10 out_sense_die1 sense line for the output of die 1 11 out_sense_die2 sense line for the output of die 2 12 gnd_sense_die sense line for the ground 13 must_die2 must of die 2 14 dbtest daughter board test pin (not used in appl ication) 15 m2s master ptc04 to slave ptc04 communication li ne 1.3.2. screw terminals - con7, con8, con9, con10 connector pin name description 1 vdd_die supply (single and double die) 2 vdd_sense_die sense line for the supply con7 3 out_die1 output of die 1 1 out_sense_die1 sense line for the output of die 1 2 out_die2 output of die 2 con8 3 out_sense_die2 sense line for the output of die 2 1 gnd_die ground (single and double die) 2 gnd_sense_die sense line for the ground con9 3 must_die1 must of die 1 1 must_die2 must of die 2 2 m2s master ptc04 to slave ptc04 communication lin e con10 3 s2m slave ptc04 to master ptc04 communication lin e
PTC04-DB-91209 ptc04 daughter board for mlx91209 PTC04-DB-91209 datasheet rev. 1.0 page 6 of 8 4/28/2011 1.3.3. force / sense jumpers ? j1 force pin name sense pin name 1 vdd_die 2 vdd_sense_die 3 out_die1 4 out_sense_die1 5 out_die2 6 out_sense_die2 7 gnd_die 8 gnd_sense_die 1.4. daughter board connectors the ptc04 main board has two connectors to the inte rface with the application. the ptc allows adding a full pcb in between (daughter board). this daughter board can be mounted on the two connectors. in some exceptional cases, a daughter b oard contains only a few wires from the analogue connector to the application connector. the pins on of the connectors are described below. meas_line_p1 +36v_supply isense_pps3 vout_pps4 ana.comp2 isense_pps2 pe5 sda rd fc isense_pps1 pe4 d1 vout_pps3 a0 meas_line_p3 pe0 f8 a6 pe3 ana.comp0 d4 agnd d6 pe7 meas_line_n3 d5 meas_line_p4 fa meas_line_n2 scl vout_pps1 d3 wr +5v_digital_supply a4 fb agnd vout_pps2 d2 d7 48 pin header 13 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 24 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 35 37 36 38 39 40 41 42 43 44 45 46 47 48 digital db connector meas_line_n4 meas_line_p2 analog db connector pe1 40 pin header 13 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 24 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 a1 pe6 ana.comp3 meas_line_n1 fe d0 +2.5v_ref_supply dgnd ana.comp1 a7 fd ff a2 a5 a3 f9 pe2 reset isense_pps4 1.4.1. digital db connector (40 pins) mainly, the digital connector is meant to expand th e programmer to extra needs. address lines a0-a7 together with the map select lines f8-ff allo ws to direct access an area of 2 k. examples would be adding a simple addressed i/o register by using the selection lines. if more complexity is needed, a full fpga can be mounted on the db board pins names description 1 ? 8 a0 ? a7 address lines 9 ? 16 d0 ? d7 data lines active during rd or wr si gnals 17 rd read: a negative pulse will indicate a sampli ng of the data on the data bus 18 wr write: a negative pulse will indicate when da ta is available on the data bus 20 reset this signal goes low by powering the ptc o r by pressing the reset button. this line can be pulled low by application. check firmware documentation for resetting by softw are. 21-22 scl / sda i 2 c bus 23-30 f8,f9,?,ff cs lines when the address areas ar e accessed 31-38 port e the full port e of the atmega core is mounted to these pins. this allows us to use advanced features like pwm, uarts, time measurement s, etc?.
PTC04-DB-91209 ptc04 daughter board for mlx91209 PTC04-DB-91209 datasheet rev. 1.0 page 7 of 8 4/28/2011 by using firmware that supports these, functions, a pplication specific requirements can be fulfilled. 39 dgnd digital ground 40 +5v digital 5 volt digital supply. maximum curre nt to get out of this supply : 250ma note : all pins are limited to 5v. despite of these prot ections, please take precautions in order to avoid damage of the main board. 1.4.2. analog db connector (48 pins) mainly, the analog connector provides all the analo g signals and measure possibilities. pins names description 28,32,36 pps 1-3 output of the high current program mable supplies 40 pps 4 output of the fast dac programmable power supply 27,31,35,39 isense_pp1-4 outputs (driver outputs be fore rsens) for current evaluations. these outputs could be used to connect to the analo g comparators in order to create fast digital signals based on current. 2,4,6,8 extmeas1-4pos there are 4 differential inpu ts for making measurements, these are the positive inputs. 10,12,14,16 extmeas1-4neg the negative inputs of ex tmeas1- 4pos 43,44,47,48 anacomp0-3 see *note. input (limited to +5v) fast level comparators in order to remove time cons uming measurement 18 +35v_supply supply to extend the daughter board with some extra drivers 24 +2.5v_ref output of internal reference all other agnd analogue ground note : all pins are limited to 35v. despite of these pro tections, please take precautions in order to avoid damage of the main board. note : some pins are protected and limited to 5 volt! de spite of these protections, please take precautions in order to avoid damage of the main bo ard.
PTC04-DB-91209 ptc04 daughter board for mlx91209 PTC04-DB-91209 datasheet rev. 1.0 page 8 of 8 4/28/2011 2. disclaimer devices sold by melexis are covered by the warranty and patent indemnification provisions appearing in its term of sale. melexis makes no war ranty, express, statutory, implied, or by descripti on regarding the information set forth herein or regar ding the freedom of the described devices from pate nt infringement. melexis reserves the right to change specifications and prices at any time and without notice. therefore, prior to designing this product into a system, it is necessary to check with melexi s for current information. this product is intended for u se in normal commercial applications. applications requiring extended temperature range, unusual envir onmental requirements, or high reliability applications, such as military, medical life-suppor t or life-sustaining equipment are specifically not recommended without additional processing by melexi s for each application. the information furnished by melexis is believed to be correct and accurate. however, melexis shall no t be liable to recipient or any third party for any d amages, including but not limited to personal injur y, property damage, loss of profits, loss of use, inte rrupt of business or indirect, special incidental o r consequential damages, of any kind, in connection w ith or arising out of the furnishing, performance o r use of the technical data herein. no obligation or liability to recipient or any third party shall ari se or flow out of melexis? rendering of technical or other ser vices. ? 2006 melexis nv. all rights reserved. for the latest version of this document, go to our website at: www.melexis.com or for additional information contact melexis direc t: europe and japan: all other locations: phone: +32 13 67 04 95 phone: +1 603 223 2362 e-mail: sales_europe@melexis.com e-mail: sales_usa@me lexis.com qs9 000, vda6.1 and iso14001 certified
|
