to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation ( http://www.renesas.com ) send any inquiries to http://www.renesas.com/inquiry .
notice 1. all information included in this document is current as of th e date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also, please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology de scribed in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or om issions from the information included herein. 7. renesas electronics products are classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product depends on the product?s quality grade, as indicated below. you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application categorized as ?specific? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intended where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electronics data sheets or data books, etc. ?standard?: computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. ?high quality?: transportation equipment (automobiles, trains, ship s, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specifically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use re nesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of c ontrolled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any fo rm, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this document or renesas electronics products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
rea03d0003-0200 rev.2.00 dec 24, 2008 page 1 of 7 ha17558b series dual operational amplifier rea03d0003-0200 rev.2.00 dec 24, 2008 description ha17558b is dual bipolar op-amp with im proved characteristics compared to ha1 7558a. it has wide bandwidth, low noise, high slew rate; wide operating voltage range and high gain characteristics. this product has a wide range of applications that is a ppropriate for audio application, as well as ac/dc converter. features ? wide bandwidth: 7 mhz ? high speed: 3 v/s ? low input noise voltage: 1 vrms ? large dc voltage gain: 110 db ? operating voltage: 2 v to 18 v ? package outline available in pb free lead frame: dp-8 sop-8 (jeita) sop-8 (jedec) applications ? audio ac-3 decoder system ? audio amplifier ? ac/dc converter ordering information part no. application package code (package name) packing abbreviation (quantity) ha17558b prdp0008af-b (dp-8fv) ? (50 pcs/stick 1,000 pcs/box) ha17558bf prsp0008de-b (fp-8dgv) el (2,500 pcs/reel) ha17558brp commercial use prsp0008dd-c (fp-8dcv) el (2,500 pcs/reel) note: this product is designed for consumer use and not for automotive and industry.
ha17558b series rea03d0003-0200 rev.2.00 dec 24, 2008 page 2 of 7 pin arrangement ?+ vout1 vin(?)1 vin(+)1 v ee v cc vout2 vin(?)2 vin(+)2 +? 8 7 6 5 1 2 3 4 (top view) 1 2 circuit schematic (1/2) ? input v cc output + input v ee
ha17558b series rea03d0003-0200 rev.2.00 dec 24, 2008 page 3 of 7 absolute maximum ratings (ta = 25c) ratings item symbol ha17558b ha17558bf ha17558brp unit v cc 18 18 18 v supply voltage v ee ?18 ?18 ?18 v differential input voltage v in (diff) 30 30 30 v common mode input voltage v cm * 3 15 15 15 v power dissipation p t 670 * 1 385 * 2 385 * 2 mw operating temperature topr ?40 to +85 ?40 to +85 ?40 to +85 c storage temperature tstg ?55 to +125 ?55 to +125 ?55 to +125 c notes: 1. this is the allowable value up to ta = 45c. derate by 8.3 mw/ c above that temperature. 2. these are the allowable values up to ta = 60c mounting on 40mm 40mm 1.6mm (t) 10% wiring density glass epoxy board. derate by 5.9 mw/c above that temperature. 3. if the supply voltage is less than 15 v, input voltage should be less than supply voltage. electrical characteristics (ta = 25c, v cc = +15 v, v ee = ?15 v, unless otherwise specified) item symbol min typ max unit test conditions input offset voltage v io ? 0.5 3 mv r s 10 k input offset current i io ? 5 50 na input bias current i ib ? 65 250 na supply current i cc ? 2.5 4 ma power supply rejection ratio psrr 80 100 ? db r s 10 k voltage gain a v 85 110 ? db r l 2 k , v o = 10 v common mode rejection ratio cmr 80 100 ? db r s 10 k 10 13 ? v r l 2 k output swing voltage v os 12 14 ? v r l 10 k output sink current i osink ? 70 ? ma v in(?) = 1 v, v in(+) = 0 v, v o = 2 v output source current i osource ? 45 ? ma v in(?) = 0 v, v in(+) = 1 v, v o = 2 v slew rate sr ? 3 ? v/ s equivalent input noise voltage v ni ? 1 ? vrms riaa, r s = 1 k , 30 khz lpf gain bandwidth product fu ? 7 ? mhz f = 10 khz total harmonic distortion thd ? 0.0045 ? % f = 1 khz, v o = 1 vrms
ha17558b series rea03d0003-0200 rev.2.00 dec 24, 2008 page 4 of 7 table of graphs electrical characteristics figure open loop voltage gain vs. frequency f 1 output swing voltage vs. frequency f 2 output swing voltage vs. load resistance r l 3 equivalent input noise voltage vs. frequency f 4 input offset voltage vs. temperature ta 5 total harmonic distortion vs. output voltage vo 6
ha17558b series rea03d0003-0200 rev.2.00 dec 24, 2008 page 5 of 7 typical characteristics curves 10 khz frequency f (hz) figure 1. open loop voltage gain vs. frequency figure 2. output swing voltage vs. frequency 051 01 5 100 1 k 10 k open loop voltage gain (db) total harmonic distortion (%) frequency f (hz) 100 1 k 10 k 100 k 1 m output swing voltage (v) 10 100 1 output swing voltage (v) temperature ta (c) ?40 35 10 ?15 60 85 frequency f (hz) 110 1 k 100 10 k 10 15 20 25 30 input offset voltage (mv) figure 5. input offset voltage vs. temperature figure 6. total harmonic distortion vs. output voltage output voltage v o (vrms) 0.01 0.1 1 10 ?6 ?5 ?4 ?3 ?2 ?1 0 1 2 3 4 5 6 0.0001 0.01 0.001 0.1 1 10 0 20 40 60 80 100 120 0 4 8 12 16 20 24 28 32 36 40 v cc = +15 v, v ee = ?15 v, ta = 25c, r l = 2 k v cc = +15 v, v ee = ?15 v, ta = 25c, r l = 2 k v cc = +15 v, v ee = ?15 v, ta = 25c v cc = +15 v, v ee = ?15 v, ta = 25c 20 khz 1 khz figure 4. equivalent input noise voltage vs. frequency v cc = +15 v, v ee = ?15 v, ta = 25c, r s = 100 v cc = +15 v, v ee = ?15 v load resistance () figure 3. output swing voltage vs. load resistance equivalent input noise voltage (nv (hz) 0.5 )
ha17558b series rea03d0003-0200 rev.2.00 dec 24, 2008 page 6 of 7 package dimensions ( ni/pd/au plating ) 5 8 4 1 3 1 p 1 e d e b b a l a e z c 0.89 2.54 1.27 0.4 80.40 7.4 10.6 15 0 2.79 2.54 2.29 0. 310. 250.19 1.30 0.56 0.5 e 1 l e c b p a e d b 3 z a 1 5.06 6.30 9.60 reference symbol dimension in millimeters min n om max 7.62 p-dip8-6.3x9.6-2.54 0.54g mass[typ.] dp-8fv prdp0008af-b renesas code jeita package code previous code a l e c 1 b 1 d e a 2 b p c x y h e z l 1 4.85 1.05 0.12 0 8 6.5 0. 15 0. 20 0.25 0.45 0.00 0.1 0.20 4.4 0.420 . 60 0.85 2.03 reference symbol dimension in millimeters min n om max 5.25 a 1 0.35 0.4 6.75 6.35 1.27 0.15 0.75 5 8 4 f *1 *2 *3 p m x y 1 index mark e a z b e h d p terminal cross section ( ni/pd/au plating ) c b 1 1 detail f a l l note) 1. dimensions"*1 (nom)"and"*2" do not include mold flash. 2. dimension"*3"does not include trim offset. e p-sop8-4.4x4.85-1.27 0.1g mass[typ.] fp-8dgv prsp0008de-b renesas code jeita package code previous code
ha17558b series rea03d0003-0200 rev.2.00 dec 24, 2008 page 7 of 7 5 8 4 f *1 *2 *3 p m x y 1 e index mark a d z h e b p terminal cross section ( ni/pd/au plating ) c b 1 1 detail f a l l 0.75 0.10 1.27 5. 80 6.20 0.4 00.34 a 1 5.30 ma xn ommin dimension in millimeters symbol reference 1.75 1. 270. 600.40 3.95 0. 250.14 0.10 0.46 0. 250. 200.15 6.10 8 0 0.25 1.08 4.90 l 1 z h e y x c b p a 2 e d b 1 c 1 e e l a note) 1. dimensions" *1 (nom)"and"*2" do not include mold flash. 2. dimension"*3"does not include trim offset. p-sop8-3.95x4.9-1.27 0.085g mass[typ.] fp-8dcv prsp0008dd-c renesas code jeita package code previous code
notes: 1. this document is provided for reference purposes only so that renesas customers may select the appropriate renesas products for their use. renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of renesas or any third party with respect to the information in this document. 2. renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. you should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. when exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. all information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas products listed in this document, please confirm the latest product information with a renesas sales office. also, please pay regular and careful attention to additional and different information to be disclosed by renesas such as that disclosed through our website. (http://www.renesas.com ) 5. renesas has used reasonable care in compiling the information included in this document, but renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. when using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or renesas products. 7. with the exception of products specified by renesas as suitable for automobile applications, renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. if you are considering the use of our products for such purposes, please contact a renesas sales office beforehand. renesas shall have no liability for damages arising out of the uses set forth above. 8. notwithstanding the preceding paragraph, you should not use renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use renesas products in any of the foregoing applications shall indemnify and hold harmless renesas technology corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. you should use the products described herein within the range specified by renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas shall have no liability for malfunctions or damages arising out of the use of renesas products beyond such specified ranges. 10. although renesas endeavors to improve the quality and reliability of its products, ic products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. in case renesas products listed in this document are detached from the products to which the renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. you should implement safety measures so that renesas products may not be easily detached from your products. renesas shall have no liability for damages arising out of such detachment. 12. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from renesas. 13. please contact a renesas sales office if you have any questions regarding the information contained in this document, renesas semiconductor products, or if you have any other inquiries. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to "http://www.renesas.com/en/network" for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7858/7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2377-3473 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 3518-3399 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 2008. renesas technology corp., all rights reserved. printed in japan. colophon .7.2
|
