View PD057VU1_7761458.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:1 version : 3 technical specification model no. : PD057VU1 the content of this information is subject to be ch anged without notice. please contact pvi or its agent for further informa tion. customers confirmation customer date by conf irmed by prep ared by p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:2 technical specification contents no. item page - cover 1 - contents 2 1 application 3 2 features 3 3 mechanical specifications 3 4 mechanical drawing of tft-lcd module 4 5 input / output terminals 5 6 absolute maximum ratings 6 7 electrical characteristics 6 8 pixel arrangement 7 9 display color and gray scale reference 8 10 interface timing 9 11 power on sequence 12 12 optical characteristics 12 13 handling cautions 15 14 reliability test 16 15 packing diagram 17 - revision history 18 p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:3 1. application this data sheet applies to a color tft lcd module, PD057VU1. PD057VU1 module applies to oa product, car tv (must use analog to digital driving board), which requires high quality flat panel display. if you must use in severe reliability environment, please dont extend over pvis reliabi lity test conditions. 2. features . qvga (320*240 pixels) resolution . amorphous silicon tft lcd panel with back-light u nit . pixel in stripe configuration . thin and light weight . display colors ? 262,144 colors . ttl interface 3. mechanical specifications parameter specifications unit screen size 5.7 (diagonal) inch display format 320 (r,g,b) 240 dot display colors 262,144 active area 115.20 (h) 86.4 (v) mm pixel pitch 0.36(h) 0.36(v) mm pixel configuration stripe outline dimension 144(w) 104.6 (h) 13.0 (d) (typ.) mm weight 202 10 g back-light ccfl, 1 tube surface treatment anti-glare + wide view film display mode normally white gray scale inversion direction 6 o`clock p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:4 4.mechanical drawing of tft-lcd module outline drawing : front view (unit : mm) p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:5 5.input / output terminals 5-1) tft-lcd panel driving connector type: elco 08-6210-033-340-800a+ , pin no 33 pins, pitch=0.5mm pin no symbol i/o description remark 1 gnd - gnd 2 ck i clock signal for sampling each data signal 3 hsync i horizontal synchronous signal(neqative) 4 vsync i vertical synchronous signal(neqative) 5 gnd - gnd 6 r0 red data signal(lsb) 7 r1 i red data signal 8 r2 i red data signal 9 r3 i red data signal 10 r4 i red data signal 11 r5 i red data signal(nsb) 12 gnd - gnd 13 g0 i green data signal(lsb) 14 g1 i green data signal 15 g2 i green data signal 16 g3 i green data signal 17 g4 i green data signal 18 g5 i green data signal(nsb) 19 gnd - gnd 20 b0 i blue data signal(lsb) 21 b1 i blue data signal 22 b2 i blue data signal 23 b3 i blue data signal 24 b4 i blue data signal 25 b5 i blue data signal(nsb) 26 gnd - gnd 27 enab i signal to settle the horizontal display position(po sitive) note5-1 28 v cc - +3.3v power supply 29 v cc - +3.3v power supply 30 r/l i horizontal display mode select signal l ? normal ,h ? left /right reverse mode note5-2 31 u/d i vertical display mode select signal h ? normal ,l :up/down reverse mode note5-3 32 qvga i qvga mode note5-4 33 gnd - gnd note5-1 ? the horizontal display start timing is settled in a ccordance with rising of enab signal. in case enab is fixed low,the horizontal start ti ming is determined as described in 10-2. don`t keep enabhigh during operation. p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:6 note 5-2 , 5-3 : the definitions of u/d & r/l r/l(pin 30)= low, u/d(pin 31)= high r/l(pin 30)= high , u/d(pin 31)= low note 5-4 : pin 32 must connect ground. (low) 5-2) backlight driving connector type: jst bhr-03vs-1, pin no 2 pins, pitc h=3.5mm pin no symbol description remark 1 v high power supply for lamp (high voltage side) red - nc this is electrically opened - 3 v low power supply for lamp (low voltage side) white note 5-11: low voltage side of backlight inverter c onnects with ground of inverter circuits. 6.absolute maximum ratings: gnd=0v, ta=25 parameters symbol condition max. unit remark input voltage v i ta=25 -0.3~+4 v note6-1 +3.3v supply voltage v cc ta=25 0~+3.6 v note6-1:ck,r0~r5,g0~g5,b0~b5,hsync,vsync,enab,r/l,u /d,v/q 7.electrical characteristics 7-1) recommended operating conditions: gnd=0v, ta=25 item symbol min. typ. max. unit remark +3.3v supply voltage v cc +3.0 +3.3 +3.6 v permissive input ripple voltage v rf - - 100 mvp-p v cc =3.3v input voltage(low) v il 0 - 0.3 v cc v input voltage(high) v ih 0.7 v cc - v cc v p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:7 7-2) recommended driving condition for back light ta=25 parameter symbol min. typ. max. unit remark lamp voltage v l 639 710 781 v i l =5ma lamp current i l 4 5 8 ma note 7-1 lamp frequency p l - 35 - khz note 7-2 starting voltage (25 ) (reference value) vs - - 1240 vrms note 7-3 starting voltage (0 ) (reference value) vs - - 1380 vrms note 7-3 note 7-1 ? in order to have proper operation of the b/l, no ma tter what kind of inverters, the output lamp current must be between min. and max. v alues to avoid the abnormal display image caused by b/l. note 7-2 ? the driving frequency of the lamp may interfere wit h the horizontal synch signal, leaving interference stripes on the display. so ple ase evaluate lcd panels beforehand. to avoid interference stripes, we recommen d to separate as far as possible the lamp frequency from the horizontal synchronous sign al and its high harmonic frequency. the inverter which pvi uses is tad347- 1. note 7-3 ? the starting voltage means the minimum voltage of inverter to turn on the lamp. and it should be applied to the lamp for more than 1 second to start up. otherwise the lamp may not be turned on . 7-3) power consumption parameters symbol typ. max. unit remark +3.3v current dissipation i cc 57 65 ma lcd panel power consumption - 0.19 0.21 w note 7-4 backlight power consumption - 3.55 3.91 w note 7-5 note 7-4: the power consumption for back light is n ot included. note 7-5: back light lamp power consumption is calc ulated by i l v l . 8. pixel arrangement the lcd module pixel arrangement is stripe configur ation. p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:8 9. display color and gray scale reference input color data color red green blue r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 basic blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 colors cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red (02) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 darker red brighter red (61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green (02) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 darker green brighter green (61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 green (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 blue (02) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 darker blue brighter blue (61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:9 10. interface timing 10-1) timing parameters ac electrical characteristics (v cc =+3.3v,gnd=0v,ta=25 ) characteristics symbol min. typ. max. unit remark frequency 1/tc - 6.3 7.0 mhz qvga=l clock duty ratio tch/tc 40 50 60 % qvga=l set up time tds 5 - - data hold time tdh 10 - - ns 50.0 63.6 - us cycle th 360 400 450 clock qvga=l horizontal sync. signal pulse width thp 2 96 200 clock cycle tv 251 262 280 line qvga=l vertical sync.signal pulse width tvp 2 - 34 line horizontal display period thd 320 clock hsync.-clock phase difference thc 10 - tc-10 ns hsync.-vsync phase difference tvh 0 - th-thp ns vertical sync.signal start position tvs 7 line qvga=l vertical display period tvd 240 line parameter symbol min. typ max unit remark setup time tes 5 - tc-10 ns enable signal pulse width tep 2 320 th-10 clock hsync-enable signal phase difference the 2 - th-340 colck qvga=l p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:10 10-2) timing diagram *1 p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:11 7th line. p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:12 11. power on sequence vdd 3.0v 0.3v 3.0v t1 t2 t3 signal*3 1. 0 t1 Q 20ms 2. 0 t2 Q 50ms 3. 0 t3 Q 1s 12. optical characteristics 12-1) specification: ta=25 parameter symbol condition min. typ. max. unit remarks horizontal 55 60 - deg note 12-1 (to 6 oclock) 45 50 - deg viewing angle vertical (to 12 oclock) cr R 10 35 40 - deg contrast ratio cr at optimized viewing angle 200 400 - - note 12-2 rise tr - 15 30 ms response time fall tf =0 - 25 50 ms note 12-3 brightness - =0 / =0 450 500 - cd/ O note 12-4 luminance uniformity u% 75 80 - % note 12-5 x 0.29 0.32 0.35 - white chromaticity y 0.33 0.36 0.39 - lamp life time - - 45000 - hr at=5ma p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:13 note 12-1: the definitions of viewing angles are as follow 12 o clock 3 o clock 9 o clock 6 o clock ? ? lamp connector note 12-2: the definition of contrast ratio cr luminance at gray level 63 luminance at gray level 0 = note 12-3: definition of response time t r and t f : 100% 90% 10% 0% w hite w hite brightness black t r t f p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:14 note 12-4: all optical measurements shall be perfor med after backlight being turned-on for 30 mins. the optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 lux). the measuring co nfiguration shows as following figure. note 12-5: the uniformity of lcd is defined as the minimum brightness of the 9 testing points u = the maximum brightness of the 9 testing points luminance meter: bm-5a or bm-7 fast (topcon) measurement distance: 500 mm +/- 50 mm ambient illumination: < 1 lux measuring direction: perpendicular to the surface of module the test pattern is white (gray level 63). 1/6 1/6 2/6 2/6 1/6 1/6 2/6 2/6 photometer (topcon bm-5a or bm-7 fast) 500 mm +/- 50 mm tft-lcd module dc/ac inverter optical characteristics measuring configuration field = 1 p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:15 13. handling cautions 13-1) mounting of module a) please power off the module when you connect the input/output connector. b) please connect the ground pattern of the inverte r circuit surely. if the connection is not perfect, some following problems may happ en possibly. 1. the noise from the backlight unit will increase. 2. the output from inverter circuit will be unstabl e. 3. in some cases a part of module will heat. c)polarizer which is made of soft material and susc eptible to flaw must be handled carefully. d) protective film (laminator) is applied on surface to protect it against scratches and dirts. it is recommended to peel off t he laminator before use and taking care of static electricity. 13-2) precautions in mounting a) when metal part of the tft-lcd module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) wipe off water drops or finger grease immediatel y. long contact with water may cause discoloration or spots. c) tft-lcd module uses glass which breaks or cracks easily if dropped or bumped on hard surface. please handle with care. d) since cmos lsi is used in the module. so take ca re of static electricity and earth yourself when handling. 13-3) adjusting module a) adjusting volumes on the rear face of the module have been set optimally before shipment. b) therefore, do not change any adjusted values. if adjusted values are changed, the specifications described may not be satisfied. 13-4) others a) do not expose the module to direct sunlight or i ntensive ultraviolet rays for many hours. b) store the module at a room temperature place. c) the voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) if lcd panel breaks, it is possibly that the liq uid crystal escapes from the panel. avoid putting it into eyes or mouth. when liquid cr ystal sticks on hands, clothes or feet. wash it out immediately with soap. e) observe all other precautionary requirements in handling general electronic components. f) please adjust the voltage of common electrode as material of attachment by 1 module. 13-5) polarizer mark the polarizer mark is to describe the direc tion of wide view angle film how to match up with the rubbing direction. p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:16 14. reliability test no test item test condition remark 1 high temperature storage test ta = +80 , 240 hrs 2 low temperature storage test ta = -40 , 240 hrs 3 high temperature operation test ta = +70 , 240 hrs 4 low temperature operation test ta = -30 , 240 hrs 5 high temperature & high humidity operation test ta = +60 , 90%rh, 240 hrs (no condensation) 6 thermal cycling test (non-operating) -20 +70 , 200 cycles 30 min 30 min 7 vibration test (non-operating) frequency: 10 ~ 57 h z /vibration width:0.075mm 58-500 hz / gravity: 9.8m/s 2 sweep time: 11 minutes test period: 3 hrs for each direction of x, y, z 8 shock test (non-operating) gravity: 490m/s 2 * 6ms direction: x, y, z 3 times for each direction 9 electrostatic discharge test (non-operating) machine mode = 200v c = 200pf , r = 0 1 times discharge for each pad ta: ambient temperature note: the protective film must be removed b efore temperature test [criteria] in the standard conditions, there is not display fu nction ng issue occurred. (including ? line defect, no image) all the cosmetic specificati on is judged before the reliability stress. p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:17 15. packing diagram p-511-328(v:3)
PD057VU1 the information contained herein is the exclusive p roperty of prime view international co., ltd. and sha ll not be distributed, reproduced, or disclosed in whole or i n part without prior written permission of prime view international co., ltd. page:18 revision history rev. issued date eng. revised contents 1.0 may.11, 2006 ? new 2.0 oct. 23, 2006 ? ?? ? page 16 low temperature storage test ?l -30 -40 low temperature operation test ?l -20 -30 3.0 feb. 05, 2007 ? page 3 h optimum viewing direction ? 6 oclock ? p-511-328(v:3)

▲Up To Search▲

Price & Availability of PD057VU1

	To Download PD057VU1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .