cs series ? ratings from 10a to 90a @ 24-280 v ac ? 3-32 v dc input range ? low off-state leakage current (snubberless) ? scr output for heavy industrial loads ? zero-crossing (resistive loads) or random-fire (inductive loads) output product selection control voltage 10a 25a 50a 75a 90a 3.5-15 vdc csd2410 csd2425 csd2450 csd2475 csd2490 15-32 vdc cse2410 cse2425 CSE2450 cse2475 cse2490 available options output specifications (1) description 10a 25a 50a 75a 90a operating voltage (47-440hz) [vrms] 24-280 24-280 24-280 24-280 24-280 transient overvoltage [vpk] 600 600 600 600 600 maximum off-state leakage current @ rated voltage [marms] 1.0 1.0 1.0 1.0 1.0 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 500 500 500 maximum load current (3) [arms] 10 25 50 75 90 minimum load current [arms] 0.15 0.15 0.15 0.25 0.25 maximum 1 cycle surge current (50/60) [apk] 115/120 239/250 597/625 954/1000 1145/1200 maximum on-state voltage drop @ rated current [vpk] 1.6 1.6 1.6 1.6 1.6 thermal resistance juncti on to case (rjc) [c/w] 1.48 1.02 0.63 0.31 0.28 maximum i2 t for fusing 50/60hz (1/2 cycle) [a2 sec] 66/60 285/259 1779/1621 4555/4150 6560/5976 minimum power factor (with maximum load) 0.5 0.5 0.5 0.5 0.5
input specifications (1) description prefix csd prefix cse control voltage range 3.5-15 vdc 15-32 vdc minimum turn-on voltage 3.5 vdc 15.0 vdc minimum turn-off voltage 1.0 vdc 1.0 vdc typical input current 15 ma @ 5 v 7 ma @15 v nominal input impedance 300 ohm 2k ohm maximum turn-on time [msec] (4) 1/2 cycle 1/2 cycle maximum turn-off time [msec] 1/2 cycle 1/2 cycle general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 10 pf ambient operating temperature range -40 to 80 c ambient storage temperature range -40 to 125 c weight (typical) 3.0 oz (86.5 g) encapsulation thermally conductive epoxy terminals srews and saddle clamps furnished, unmounted recommended terminal screw torque range: 6-32 screws-10 in/lbs. 8-32 & 10-32 screws - 20 in. lbs. (screws dry without grease) fastons: single pair (up to 25a) double pair* (up to 50a). *caution: user must connect to both pairs general notes 1) all parameters at 25c unless otherwise specified. 2) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 3) heat sinking required, for derating curves see page 2. 4) turn-on time for random turn-on version (-10 suffix) is 0.1ms
mechanical specifications thermal derate information agency approvals e116949 lr81689 10143 ug rev. 113011
annex - enviromental information
|
