eqcd 020 06.00 ted sed ? eqcd 040 40.00 ttl str ? full housing for electrical isolation hitachi 38 awg mini coax cable 50 ? controlled impedance system www.samtec.com samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. f-203-1 (preliminary) tm mates with: qte, qse high data rate cable assy specifications signal lines end no. 1 wire length end no. 2 xx.xx = conductor length in inches (152mm) 06.00" to (1m) 40.00" 020, 040, 060, 080 (call for other sizes) eqcd series note: this series is non-standard, non-returnable. eqcd specify end assemblies from chart gender = t or s (qte terminal or qse socket) orientation = t, e or b (top, edge or bottom) notch = r, l, u or d (right, left, up or down) wiring option 1 = pin 1 to pin 1 2 = pin 1 to pin 2 3 = pin 1 to second last pin 4 = pin 1 to last pin screw option emf = end no. 1 ems = end no. 2 emb = both ends (edge mount only) end ttr ttl tbr tbl str stl sbr sbl surface mount t erminal, t op, notch r ight t erminal, t op, notch l eft t erminal, b ottom, notch r ight t erminal, b ottom, notch l eft s ocket, t op notch r ight, s ocket, t op, notch l eft s ocket, b ottom, notch r ight s ocket, b ottom, notch l eft end teu ted seu sed edge mount t erminal, e dge, notch u p t erminal, e dge, notch d own s ocket, e dge, notch u p s ocket, e dge, notch d own for complete specifications see www.samtec.com?eqcd hitachi 38 awg mini co-ax single-ended routing 0,8mm (.0315") pitch vertical and edge mount terminations to cable ideal for longer cable assemblies; (152mm) 6" to (1m) 40" standard high cable flexing life (> 40,000 cycles) small bend radii (< 2.5mm) edge mount locking and latching options coming soon: differential pair routing 0,5mm (.0197") pitch (hqcd series) vertical locking and latching options conductor length (1,27) .050 t= (9,14) .360 s= (8,38) .330 (11,94) .470 end no. 1 (?eu??mf shown) end no. 2 (?tr shown)
|