View 2SD2167_1197091.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2SD2167
Transistors
Power Transistor (314V, 2A)
2SD2167
Features 1) Built-in zener diode between collector and base. 2) Zener diode has low voltage dispersion. 3) Strong protection against reverse power surges due to low loads. 4) PC=2 W (on 40x40x0.7mm ceramic board) External dimensions (Unit : mm)
4.0 1.0 2.5 0.5
1.5 0.4
(1)
3.0
0.5
(3)
4.5
1.6
(2)
(1) Base (2) Collector (3) Emitter
1.5 0.4
ROHM : MPT3 EIAJ : SC-62
Absolute maximum ratings (Ta = 25C)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits 314 314 5 2 3 0.5 2 150 -55 to +150 Unit V V V A(DC) A(Pulse) 1 W W C C
2
1 Pw=20ms , duty=1 / 2 2 When mounted on a 40 x 40 x 0.7 mm ceramic board.
Packaging specifications and hFE
Type Package hFE Marking Code Basic ordering unit (pieces)
Denotes hFE
2SD2167 MPT3 NPQ DL T100 1000
Electrical characteristics (Ta = 25C)
Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance
Measured using pulse current.
Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob
Min. 27 27 5 - - - - 56 - -
Typ. - - - - - - 0.25 - 100 25
Max. 35 35 - 1 1 1 0.5 270 - -
Unit V V V A A V V - MHz pF
IC = 50A IC = 1mA IE = 50A VCB = 20V VEB = 5V IC/IB = 2A/0.2A IC/IB = 1A/50mA VCE/IC = 3V/0.5A VCE = 3V , IE = -0.5A , f= 30MHz VCB = 10V , IE = 0A , f = 1MHz
0.4
Conditions
1.5

Rev.A
1/2
2SD2167
Transistors
Electrical characteristics
20
A 50m
5
500
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (A)
1.6
1.2
Ta=25C 45mA 40mA 35mA 30mA 25mA A 20m 15mA
10mA 5mA
2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 0.002
Ta=25C VCE=3V
200 100 50
3V
Ta=25C
VCE=5V
20 10 5
0.8
0.4
0 0
IB=0
1 2 3 4 5
0.001 0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.001
0.005 0.01
0.05 0.1 0.2 0.5
1
2
5
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
BASE TO EMITTER VOLTAGE : VBE (V)
COLLECTOR CURRENT : IC (A)
Fig.1 Ground emitter output characteristics
Fig.2 Ground emitter propagation characteristics
Fig.3 DC current gain vs. collector current
COLLECTOR SATURATION VOLTAGE :VCE (sat) (V)
2 1
Ta=25C
COLLECTOR OUTPUT CAPACITANCE :COb (pF)
500
200
VCE=3V Ta=25C
200
Ta=25C IE=0A, f=1MHz
100
0.5
100
50
0.2 0.1 0.05
IC/IB=20 IC/IB=10
50
20
20 10
10
0.02 0.01 0.001 0.005 0.01 0.05 0.1 0.2 0.5 1 2 5
5 -1 -2
-5
-10 -20
-50 -100 -200 -500 -1000
5
0.5
1
2
5
10
20
50
COLLECTOR CURRENT : IC (A)
EMITTER CURRENT : IE (mA)
COLLECTOR TO BASE VOLTAGE : VCB (V)
Fig.4 Collector-emitter saturation voltage vs. collector current
Fig.5 Resistance ratio vs. collector current
Fig.6 Collector output capacitance vs. collector-base voltage
5
IC MAX (PULSE)
s 1m
10
COLLECTOR CURRENT : IC (A)
2
ms
0m 10
1 0.5
s
DC
0.2 0.1
0.05
Ta=25C SINGLE PULSE When mounted on a 14 18 0.8mm glass epoxy board. 0.02 0.1 0.2 0.5 1 2 5 10
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.7 Safe operating area
+
+
20
50
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of 2SD2167

	To Download 2SD2167 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .