|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Genesys Logic, Inc. GL603USB-XP2P / GL603USB-A-XP2P USB / PS2 All-in-1 Mouse Controller Datasheet Revision 1.20 Aug. 11, 2003 GL603USB-XP2P / GL603USB-A-XP2P Copyright: Copyright (c) 2003 Genesys Logic Incorporated. All rights reserved. No part of the materials may be reproduced in any form or by any means without prior written consent of Genesys Logic Inc.. Disclaimer: ALL MATERIALS ARE PROVIDED "AS IS" WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND. NO LICENSE OR RIGHT IS GRANTED UNDER ANY PATENT OR TRADEMARK OF GENESYS LOGIC INC.. GENESYS LOGIC HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS IN REGARD TO MATERIALS, INCLUDING ALL WARRANTIES, IMPLIED OR EXPRESS, OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF INTELLECTUAL PROPERTY. IN NO EVENT SHALL GENESYS LOGIC BE LIABLE FOR ANY DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES RESULTING FROM LOSS OF INFORMATION OR PROFITS. PLEASE BE ADVISED THAT THE MATERIALS MAY CONTAIN ERRORS OR OMMISIONS. GENESYS LOGIC MAY MAKE CHANGES TO THE MATERIALS OR TO THE PRODUCTS DESCRIBED THEREIN AT ANY TIME WITHOUT NOTICE. Trademarks: is a registrated trademark of Genesys Logic Inc.. All trademarks are the properties of their respective owners. Office: Genesys Logic, Inc. 12F, No. 205, Sec. 3, Beishin Rd., Shindian City, Taipei, Taiwan Tel: (886-2) 8913-1888 Fax: (886-2) 6629-6168 http://www.genesyslogic.com (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 2 GL603USB-XP2P / GL603USB-A-XP2P Revision History Revision 1.00 1.10 1.20 Date 05/01/2003 06/30/2003 08/11/2003 First formal release Changed 3D5B optical sensor circuit R1 and R2 from 47K to 47K~100K Changed Figure 4.6 and 4.12 application circuit Description (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 3 GL603USB-XP2P / GL603USB-A-XP2P TABLE OF CONTENTS CHAPTER 1 CHAPTER 2 CHAPTER 3 GENERAL DESCRIPTION........................................................................ 7 FEATURES ................................................................................................... 7 PIN ASSIGNMENT...................................................................................... 8 3.1 PINOUTS ......................................................................................................................... 8 3.2 PIN DESCRIPTIONS ......................................................................................................... 9 CHAPTER 4 APPLICATION CIRCUIT ........................................................................ 10 4.1 GL603USB-XP2P ....................................................................................................... 10 4.1.1 3D5B Ball Type Circuit ...................................................................................... 10 4.1.2 3D5B with HDNS-2000 Optical Sensor Circuit ............................................... 11 4.1.3 3D5B with ADNS-2051 Optical Sensor Circuit................................................ 12 4.1.4 3D5B with ADNS-2610 Optical Sensor Circuit................................................ 13 4.1.5 3D5B with ADNS-2620 Optical Sensor Circuit................................................ 14 4.1.6 3D5B with PAN101B Optical Circuit ............................................................... 15 4.2 GL603USB-A-XP2P ................................................................................................... 16 4.2.1 3D3B Ball Type Circuit ...................................................................................... 16 4.2.2 3D3B with HDNS-2000 Optical Sensor Circuit ............................................... 17 4.2.3 3D3B with ADNS-2051 Optical Sensor Circuit................................................ 18 4.2.4 3D3B with ADNS-2610 Optical Sensor Circuit................................................ 19 4.2.5 3D3B with ADNS-2620 Optical Sensor Circuit................................................ 20 4.2.6 3D3B with PAN101B Optical Sensor Circuit................................................... 21 CHAPTER 5 BONDING DIAGRAM .............................................................................. 22 5.1 GL603USB-XP2P FOR 3D5B 20-PIN.......................................................................... 22 5.2 GL603USB-A-XP2P FOR 3D3B 18-PIN ..................................................................... 23 CHAPTER 6 PACKAGE DIMENSION.......................................................................... 24 6.1 GL603USB-XP2P P-DIP AND SOP PACKAGE .......................................................... 24 6.2 GL603USB-A-XP2P P-DIP AND SOP PACKAGE...................................................... 25 (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 4 GL603USB-XP2P / GL603USB-A-XP2P LIST OF FIGURES FIGURE 3.1 - GL603USB-XP2P (3D5B) PINOUT DIAGRAM............................................. 8 FIGURE 3.2 - GL603USB-A-XP2P (3D3B) PINOUT DIAGRAM ........................................ 8 FIGURE 4.1 - GL603USB-XP2P 3D5B BALL MOUSE...................................................... 10 FIGURE 4.2 - GL603USB-XP2P 3D5B HDNS-2000 OPTICAL MOUSE .......................... 11 FIGURE 4.3 - GL603USB-XP2P 3D5B ADNS-2051 OPTICAL MOUSE .......................... 12 FIGURE 4.4 - GL603USB-XP2P 3D5B ADNS-2610 OPTICAL MOUSE .......................... 13 FIGURE 4.5 - GL603USB-XP2P 3D5B ADNS-2620 OPTICAL MOUSE .......................... 14 FIGURE 4.6 - GL603USB-XP2P 3D5B PAN101B OPTICAL MOUSE.............................. 15 FIGURE 4.7 - GL603USB-A-XP2P 3D3B BALL MOUSE ................................................. 16 FIGURE 4.8 - GL603USB-A-XP2P 3D3B HDNS-2000 OPTICAL MOUSE ...................... 17 FIGURE 4.9 - GL603USB-A-XP2P 3D3B ADNS-2051 OPTICAL MOUSE ...................... 18 FIGURE 4.10 - GL603USB-A-XP2P 3D3B ADNS-2610 OPTICAL MOUSE .................... 19 FIGURE 4.11 - GL603USB-A-XP2P 3D3B ADNS-2620 OPTICAL MOUSE .................... 20 FIGURE 4.12 - GL603USB-A-XP2P 3D3B PAN101B OPTICAL MOUSE........................ 21 FIGURE 5.1 - GL603USB-XP2P FOR 3D5B 20-PIN ......................................................... 22 FIGURE 5.2 - GL603USB-A-XP2P FOR 3D3B 18-PIN..................................................... 23 FIGURE 6.1 - PACKAGE OUTLINE DIMENSION FOR 20-PIN P-DIP .................................. 24 FIGURE 6.2 - PACKAGE OUTLINE DIMENSION FOR 20-PIN SOP..................................... 24 FIGURE 6.3 - PACKAGE OUTLINE DIMENSION FOR 18-PIN P-DIP .................................. 25 FIGURE 6.4 - PACKAGE OUTLINE DIMENSION FOR 18-PIN SOP..................................... 25 LIST OF TABLES TABLE 3.1 - PIN DESCRIPTIONS........................................................................................... 9 (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 5 GL603USB-XP2P / GL603USB-A-XP2P GL603USB-XP2P (3D5B) GL603USB-A-XP2P (3D3B) All in 1 USB/PS2 Mouse Controller Features Fully CMOS Static Design 8 Bits RISC-like Micro Controller 1.5Mbps USB SIE engine 6Mhz external clock Internal switch for USB D+/D-and PS2 CLK/Data I/O 3D3B Package Type : 18 PDIP/SOIC LB MB R B VCC OSCO OSCI Z1 D+/CLK D-/DAT 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 Z2 V3.3 3D5B Package Type : 20 PDIP/SOIC LB MB R B B5 VCC OSCO OSCI Z1 D+/CLK D-/DAT 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 B4 Z2 V3.3 GL603USB-A-XP2P On chip 3.3V output 5V operation voltage 18 / 20 pin PDIP, SOIC Package 0-40C operation temperature GL603USB-XP2P Mouse Functions Microsoft 3D Intellimouse and IBM PS/2 mouse compatible GL603USB-A-XP2P supports 3D3B GL603USB-XP2P supports 3D5B Z axis support two kinds of scroller input (mechanical and optomechanical) Power Management Suspend current < 500 uA Sensor Support Support Traditional Ball Type Sensor Support PixArt PAN101B Optical Sensor Support Agilent HDNS-2000 Optical Sensor Support Agilent ADNS-2051 Optical Sensor Support Agilent ADNS-2610 Optical Sensor Support Agilent ADNS-2620 Optical Sensor Special Function Support Agilent ADNS-2051 Optical Sensor 400dpi/800dpi selection Support Traditional Ball Type Sensor with 4 Bit ADC auto reference function (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 6 GL603USB-XP2P / GL603USB-A-XP2P CHAPTER 1 GENERAL DESCRIPTION The Genesys Logic XP2P series is the most powerful USB/PS2 combo mouse controller. GL603USB-XP2P is suit for 3D5B(buttons) application with 20 pin PDIP/SOIC package and GL603USB-A-XP2P is suit for 3D3B(buttons) application with 18 pin PDIP/SOIC package. It can adopt with Agilent HDNS-2000, ADNS-2051, ADNS-2610, ADNS-2620 and PixArt PAN101B optical sensor or the traditional ball type mouse. The user may use the GL603USB-XP2P to design almost all style of mouse easily. CHAPTER 2 FEATURES Fully CMOS Static Design. 8 Bits RISC-like Micro Controller. 1.5Mbps USB SIE engine. Low-cost and powerful solution for PS/2 and low-speed USB combo mouse. USB Specification Compliance. - Conforms to USB 1.5Mbps Specification, Version 1.1 - Conforms to USB HID Class Specification, Version 1.1 - Support 1 device address and 2 endpoints(include endpoint 0). Integrated USB transceiver with open drain I/O capability. - In PS/2 mode, D+ used as CLK and D- used as DATA. - Use legacy USB cable and an USB to PS/2 converter to connect PS/2 port. On-chip 3.3 V output - No external regulator required. 6 MHz external clock. 5V operation voltage. Internal power-on reset(POR). Internal power-fail detector. Supports suspend/normal mode power management - Suspend current lower than 500uA for whole mouse system. Microsoft 3D Intellimouse and IBM PS/2 mouse compatible Microsoft web mouse compatible. Z axis can support two kinds of scroller input(mechanical and optomechanical). Internal switch for USB D+/D- and PS2 CLK/Data I/O. Supports Agilent HDNS-2000, ADNS-2051, ADNS-2610 and ADNS-2620 optical sensor. It also supports 400/800 DPI selection via DPIS selection pin for ADNS-2051 only. Support PixArt PAN101B optical sensor. Support Traditional Ball Type Sensor with 4 Bit ADC auto reference function. 18/20 pin PDIP or SOIC package. (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 7 GL603USB-XP2P / GL603USB-A-XP2P CHAPTER 3 PIN ASSIGNMENT 3.1 Pinouts LB MB RB B5 VCC OSCO OSCI Z1 D+/CLK D-/DAT 1 20 X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 B4 Z2 V3.3 GL603USB-XP2P 2 3 4 5 6 7 8 9 10 19 18 17 16 15 14 13 12 11 Figure 3.1 - GL603USB-XP2P (3D5B) Pinout Diagram GL603USB-A-XP2P LB MB RB VCC OSCO OSCI Z1 D+/CLK D-/DAT 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 Z2 V3.3 Figure 3.2 - GL603USB-A-XP2P (3D3B) Pinout Diagram (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 8 GL603USB-XP2P / GL603USB-A-XP2P 3.2 Pin Descriptions Table 3.1 - Pin Descriptions Pin Name 20Pin 18Pin Type LB MB RB B5 VCC OSCO OSCI Z1 D+/CLK D-/DAT V3.3 Z2 B4 GPIO1 GPIO2 GND Y1/DPIS Y2/PD X1/SDIO X2/SCLK 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 I I I I P O I I Description Left button input Middle button input Right button input The 5th button input +5V power input 6 MHz ceramic resonator or crystal output 6MHz resonator or crystal 6 MHz ceramic resonator or crystal input Note Internal pull up resistor 10K Internal pull up resistor 10K Internal pull up resistor 10K Internal pull down resistor 32K 6MHz resonator or crystal Internal pull down resistor 32K Need 7.5K resistor to GPIO2 Need 7.5K pull up resistor to VCC a 0.1uF to 1uF capacitor should be added on external circuit for this pin Z axis input 1 I/O USB D+ or PS/2 clock I/O USB D- or PS/2 data O I I O 3.3V output Z axix input 2 The 4th button input Power control (20mA driver capability) Internal pull down resistor 32K Internal pull down resistor 32K Normal run=Low, Suspend=Vcc I/O PS2 enable P I/O Ground Y axis input 1 DPI selector for ADNS-2051 optical mouse Internal pull down resistor 10K Y axis input 2 I/O Power down pin for ADNS-2051 optical Internal pull down resistor 10K mouse X axis input 1 I/O Serial data from Agilent sersor X axis input 2 I/O Serial clock to Agilent sersor Internal pull down resistor 10K Internal pull down resistor 10K (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 9 GL603USB-XP2P / GL603USB-A-XP2P CHAPTER 4 APPLICATION CIRCUIT 4.1 GL603USB-XP2P 4.1.1 3D5B Ball Type Circuit VCC U1 C1 0.1U LB MB RB B5 1 2 3 4 5 6 7 8 9 10 LB MB RB B5 VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 B4 Z2 V3.3 20 19 18 17 16 15 14 13 12 11 X2 X1 Y2 Y1 GPIO2 GPIO1 B4 Z2 3.3V 1 R1 47K C4 0.1U GPIO2 1 2 R3 7.5K 6MHz Z1 DP/CLK DM/DATA C3 30P VCC R2 7.5K 1 2 C2 30P Y1 GL603USB-XP2P VCC C5 10U JP1 R4 1 1 R5 33 2 2 1 2 3 4 HEADER 4 USB CONNECTOR Note Two option Circuit : 1. GL603USB : Mount R3 (7.5K ohm) 2. GL607USB Remove R3 (7.5K ohm) 33 2 DP/CLK VCC Note: Put the C1 (0.1u) as near as U2 Put the C5 (10u) as near as JP1 Scroll Option VCC 1 Adjust R2&R3 to minimize Suspend Current < 500 uA R6 47K 0 1 GPIO1 2 2 Z2 1 S1 GPIO1 must be refer to the circuit , otherwise the mouse will be failed R8 R7 47K Z1 680 ENCODER Mechanical Encoder SW1 D1 LED LB X1 SW2 MB MIDDLE PUSHBUTTON LIFT PUSHBUTTON 2 VCC X2 SW3 RB RIGHT PUSHBUTTON R9 680 D2 LED VCC Z1 D3 LED Y1 SW4 BUTTON Button 4 GPIO1 Z2 GPIO1 Y2 B4 SW5 BUTTON Button 5 B5 IR/PT Optomechanical Scroll IR/PT Figure 4.1 - GL603USB-XP2P 3D5B Ball Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 10 GL603USB-XP2P / GL603USB-A-XP2P 4.1.2 3D5B with HDNS-2000 Optical Sensor Circuit VCC 1 VCC R1 R U2 1 R2 R 2 Note: R=47K~100K Depend on suspend current and voltage. C1 0.1U LB MB RB B5 6MHz Z1 DP/CLK DM/DATA C3 30P VCC 1 2 3 4 5 6 7 8 9 10 LB MB RB B5 VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 B4 Z2 V3.3 20 19 18 17 16 15 14 13 12 11 X2 X1 Y2 Y1 GPIO2 GPIO1 B4 Z2 3.3V 2 VCC R3 GPIO1 1K XGPIO1 C4 1U 3.3V C5 0.1U GPIO1 1 1K R4 2 Q2 2N3906 R5 R D1 LED Q1 2N3906 C2 30P Y2 GL603USB-XP2P VCC R6 7.5K 1 2 C6 10U JP1 1 1 R7 33 2 2 1 2 3 4 HEADER 4 9 Y1 X1 X2 Y1 Y2 18.432.MHz 11 2 3 4 5 XTAL2 MD/XA RB/XB MB/YA LB/YB U1 C7 0.1U REFB LED RST 8 6 15 16 1 C9 224P C8 1U 14 13 VDD4 VDD5 XTAL1 VDD3 7 R8 33 Q3 2N3904 Note: Put the C1 (0.1u) as near as U2 Put the C6 (10u) as near as JP1 USB CONNECTOR GND1 Scroll Option S1 2 0 1 ENCODER Z2 XGPIO1 Z1 10 HDNS-2000 GPIO1 must be refer to the circuit , otherwise the mouse will be failed Mechanical Encoder GPIO2 1 R9 7.5K VCC 2 Note Two option Circuit : 1. GL603USB : Mount R9 (7.5K ohm) 2. GL607USB : Remove R9 (7.5K ohm) DP/CLK R10 680 SW1 LB D2 LED Z1 SW2 MB MIDDLE PUSHBUTTON LIFT PUSHBUTTON SW3 RB GPIO1 Z2 RIGHT PUSHBUTTON IR/PT Optomechanical Scroll VCC SW4 BUTTON Button 4 Button 5 B4 SW5 B5 BUTTON Figure 4.2 - GL603USB-XP2P 3D5B HDNS-2000 Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. 12 GND2 DATA CLK Page 11 GL603USB-XP2P / GL603USB-A-XP2P 4.1.3 3D5B with ADNS-2051 Optical Sensor Circuit VCC 1 VCC 1 R1 U2 C1 0.1U LB MB RB B5 1 2 3 4 5 6 7 8 9 10 LB MB RB B5 VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 B4 Z2 V3.3 20 19 18 17 16 15 14 13 12 11 R SCLK SDIO PD DPIS GPIO2 GPIO1 B4 Z2 3.3V 2 SW 2 R2 R Note: R=47K~100K Depend on suspend current and voltage. 800 DPI (Hi) 400 DPI (Floating) VCC S1 6MHz Z1 DP/CLK DM/DATA C3 30P VCC C2 30P Y2 GL603USB-XP2P C4 0.1U VCC R4 7.5K 1 2 C5 10U JP1 R5 1 1 R6 33 2 2 1 2 3 4 HEADER 4 USB CONNECTOR 9 Y1 18.432 MHz 11 2 3 4 5 OSC_OUT SDIO XA XB YB YA GND GND SCLK R_BIN C6 0.1U C7 13 10U U1 7 D1 C8 0.1U REFB XY_LED PD 8 6 15 16 1 14 1 R7 R PD SDIO SCLK C9 10U HLMP ED80 R3 GPIO1 1 1K XGPIO1 REFA 2 Q1 2N3906 OSC_IN 33 Note: Put the C1 (0.1u) as near as U2 Put the C5 (10u) as near as JP1 10 ADNS-2051 Scroll Option S2 2 0 1 ENCODER Z2 XGPIO1 GPIO2 Z1 GPIO1 must be refer to the circuit , otherwise the mouse will be failed 12 REFA VDD Mechanical Encoder 1 R8 7.5K Note Two option Circuit : 1. GL603USB : Mount R8 (7.5K ohm) 2. GL607USB : Remove R8 (7.5K ohm) VCC DP/CLK R9 SW1 680 D2 LED LB LIFT PUSHBUTTON 2 Z1 SW2 MB MIDDLE PUSHBUTTON SW3 RB GPIO1 Z2 RIGHT PUSHBUTTON IR/PT Optomechanical Scroll SW4 BUTTON VCC B4 BUTTON Button 4 Button 5 B5 SW5 Figure 4.3 - GL603USB-XP2P 3D5B ADNS-2051 Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. 2 Page 12 GL603USB-XP2P / GL603USB-A-XP2P 4.1.4 3D5B with ADNS-2610 Optical Sensor Circuit VCC VCC 1 R1 C1 0.1U LB MB RB B5 U2 1 2 3 4 5 6 7 8 9 10 LB MB RB B5 VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 B4 Z2 V3.3 20 19 18 17 16 15 14 13 12 11 SCLK SDIO 2 R Note: R=47K~100K Depend on suspend current and voltage. ADNS-2610 Detection R2 R 2 1 Mount R2 : H/W Detection Remove R2 : Auto Detection VCC 6MHz Y2 C2 30P C3 30P Z1 DP/CLK DM/DATA GPIO2 GPIO1 B4 Z2 3.3V R3 GPIO1 1 1K 2 GL603USB-XP2P C4 0.1U VCC R4 7.5K 1 2 C7 10U JP1 1 1 R7 33 2 2 1 2 3 4 HEADER 4 USB CONNECTOR VCC Q1 2N3906 XGPIO1 1 1 R5 100K 2 2 D1 HLMP ED80 7 Q2 2N3906 R6 R C5 0.1U C6 4.7U R8 33 U1 Note: Put the C1 (0.1u) as near as U2 Put the C7 (10u) as near as JP1 1 Y1 24 MHz 2 VDD OSC_IN LED_CNTL OSC_OUT SDIO REFA GND SCK R9 5 1 1K 3 4 SDIO SCLK 2 Scroll Option S1 2 0 1 ENCODER Z2 XGPIO1 Z1 8 C8 2.2U Mechanical Encoder ADNS-2610 GPIO1 must be refer to the circuit , otherwise the mouse will be failed VCC GPIO2 R11 680 D2 LED 1 R10 7.5K Note Two option Circuit : 1. GL603USB : Mount R10 (7.5K ohm) 2. GL607USB : Remove R10 (7.5K ohm) Z1 DP/CLK GPIO1 Z2 LB 2 SW1 LIFT PUSHBUTTON IR/PT Optomechanical Scroll MB VCC SW4 BUTTON RB SW2 MIDDLE PUSHBUTTON SW3 RIGHT PUSHBUTTON Button 4 Button 5 B4 SW5 B5 BUTTON Figure 4.4 - GL603USB-XP2P 3D5B ADNS-2610 Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. 6 Page 13 GL603USB-XP2P / GL603USB-A-XP2P 4.1.5 3D5B with ADNS-2620 Optical Sensor Circuit VCC Note: R=47K~100K Depend on suspend current and voltage. VCC 1 R1 C1 0.1U LB MB RB B5 U2 1 2 3 4 5 6 7 8 9 10 LB MB RB B5 VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 B4 Z2 V3.3 20 19 18 17 16 15 14 13 12 11 SCLK SDIO 2 R R 2 1 R2 ADNS-2620 Detection Mount R2 : H/W Detection Remove R2 : Auto Detection 6MHz Y2 C2 30P C3 30P Z1 DP/CLK DM/DATA GPIO2 GPIO1 B4 Z2 3.3V R3 GPIO1 1 1K 2 VCC GL603USB-XP2P C4 0.1U VCC R4 7.5K 1 2 C7 10U JP1 1 1 R7 33 C5 0.1U VCC Q1 2N3906 XGPIO1 1 1 R5 100K 2 R6 R 2 D1 HLMP ED80 7 VDD Q2 2N3906 C6 4.7U 2 2 R8 33 1 2 3 4 HEADER 4 USB CONNECTOR 1 OSC_IN LED_CNTL 2 OSC_OUT SDIO REFA GND 8 SCK U1 R9 5 1 1K 3 4 SDIO SCLK 2 Note: Put the C1 (0.1u) as near as U2 Put the C7 (10u) as near as JP1 Y1 24 MHz Scroll Option S1 2 0 1 ENCODER Z2 XGPIO1 Z1 C8 2.2U Mechanical Encoder ADNS-2620 GPIO1 must be refer to the circuit , otherwise the mouse will be failed VCC GPIO2 1 R11 680 D2 LED 2 R10 7.5K Note Two option Circuit : 1. GL603USB : Mount R10 (7.5K ohm) 2. GL607USB : Remove R10 (7.5K ohm) Z1 DP/CLK GPIO1 Z2 SW1 LB LIFT PUSHBUTTON IR/PT Optomechanical Scroll VCC SW4 BUTTON SW2 MB MIDDLE PUSHBUTTON SW3 RB RIGHT PUSHBUTTON Button 4 Button 5 B4 SW5 B5 BUTTON Figure 4.5 - GL603USB-XP2P 3D5B ADNS-2620 Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. 6 Page 14 GL603USB-XP2P / GL603USB-A-XP2P 4.1.6 3D5B with PAN101B Optical Circuit VCC 1 VCC 1 R1 47K~100K U2 C1 0.1U LB MB RB B5 1 2 3 4 5 6 7 8 9 10 LB MB RB B5 VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 B4 Z2 V3.3 20 19 18 17 16 15 14 13 12 11 X2 X1 Y2 Y1 GPIO2 GPIO1 B4 Z2 3.3V C2 0.1U 2 2 R2 47K~100K VCC R3 GPIO1 1 1K XGPIO1 1 XGPIO1 R4 R D1 2 LED 10P Y1 18.432.MHz 10P U3 GND XGPIO1 C9 1U 2 VI VO 3 C10 10U C11 0.1U C12 1U C13 0.1U 3 4 5 6 7 8 9 10 2 1 1 1 1 R7 10K 2 2 R8 10K U1 1 VSS_LED LED OSCOUT OSCIN VSSD VSSA VDDD VDDA VRB VRT PD SDIO SCLK YB NC YA XB NC XA VAY 20 19 18 17 16 15 14 13 12 11 X1 Y2 X2 Y1 2 GPIO1 VCC 2 Q1 2N3906 Y2 6MHz C3 30P C4 30P Z1 DP/CLK DM/DATA PAN101BOI USE ONLY GL603USB-XP2P C5 0.1U R5 10K 2 R6 10K VCC R9 1 7.5K 2 C7 10U JP1 R10 33 1 2 1 2 R11 33 1 2 3 4 HEADER 4 USB CONNECTOR C8 VCC C6 Note: Put the C1 (0.1u) as near as U2 Put the C7 (10u) as near as JP1 3.3V Regulator 1 PAN101B Scroll Option S1 2 0 1 ENCODER Z2 XGPIO1 Z1 GPIO1 must be refer to the circuit , otherwise the mouse will be failed GPIO2 Note R12 7.5K 1 Mechanical Encoder 2 Two option Circuit : 1. GL603USB : Mount R12 (7.5K ohm) 2. GL607USB : Remove R12 (7.5K ohm) DP/CLK VCC R13 LB 680 SW1 LIFT PUSHBUTTON SW3 D2 LED MB Z1 SW5 RB RIGHT PUSHBUTTON MIDDLE PUSHBUTTON GPIO1 Z2 IR/PT Optomechanical Scroll VCC SW2 BUTTON Button 4 Button 5 B4 SW4 B5 BUTTON Figure 4.6 - GL603USB-XP2P 3D5B PAN101B Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 15 GL603USB-XP2P / GL603USB-A-XP2P 4.2 GL603USB-A-XP2P 4.2.1 3D3B Ball Type Circuit VCC C1 0.1U U1 LB MB RB 1 2 3 4 5 6 7 8 9 LB MB RB VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 Z2 V3.3 18 17 16 15 14 13 12 11 10 X2 X1 Y2 Y1 GPIO2 GPIO1 Z2 3.3V C4 0.1U 1 GPIO2 6MHz Z1 DP/CLK DM/DATA C3 30P R1 7.5K Note Two option Circuit : 1. GL603USB : Mount R1 (7.5K ohm) 2. GL607USB : Remove R1 (7.5K ohm) C2 30P Y1 VCC R2 7.5K 1 2 GL603USB-A-XP2P 2 DP/CLK VCC C5 LB 10U JP1 R3 1 1 R4 33 2 2 1 2 3 4 HEADER 4 SW1 LIFT PUSHBUTTON SW2 MB MIDDLE PUSHBUTTON 33 SW3 RB RIGHT PUSHBUTTON Note: Put the C1 (0.1u) as near as U1 Put the C5 (10u) as near as JP1 USB CONNECTOR Scroll Option VCC 1 Adjust R2&R3 to minimize Suspend Current < 500 uA R6 47K VCC 0 1 GPIO1 2 2 Z2 1 S1 R7 R5 47K Z1 680 D1 LED ENCODER Mechanical Encoder 2 X1 VCC X2 R8 680 D2 LED Z1 D3 LED Y1 GPIO1 Z2 GPIO1 Y2 IR/PT Optomechanical Scroll IR/PT Figure 4.7 - GL603USB-A-XP2P 3D3B Ball Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 16 GL603USB-XP2P / GL603USB-A-XP2P 4.2.2 3D3B with HDNS-2000 Optical Sensor Circuit VCC 1 R1 GPIO1 R2 47K C1 0.1U U2 LB MB RB 1 2 3 4 5 6 7 8 9 LB MB RB VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 Z2 V3.3 18 17 16 15 14 13 12 11 10 X2 X1 Y2 Y1 GPIO2 GPIO1 Z2 3.3V C5 1U VCC R5 7.5K 1 2 C8 Y1 10U JP1 R6 1 1 R7 33 2 2 1 2 3 4 HEADER 4 18.432.MHz 11 X1 2 X2 3 Y1 4 Y2 5 XTAL2 MD/XA RB/XB MB/YA LB/YB 9 2 1K XGPIO1 3.3V C2 0.1U GPIO1 1 1K R3 2 Q2 2N3906 Q1 2N3906 VCC VCC 6MHz Z1 DP/CLK DM/DATA C4 30P C3 30P Y2 VCC GL603USB-A-XP2P U1 C6 0.1U REFB LED RST GND1 GND2 DATA CLK 8 R 6 15 16 1 C9 224P Q3 2N3904 D1 LED C7 1U R4 14 13 VDD4 7 10 VDD3 12 XTAL1 33 Note: Put the C1 (0.1u) as near as U2 Put the C8 (10u) as near as JP1 USB CONNECTOR HDNS-2000 Scroll Option S1 2 0 1 ENCODER Z2 XGPIO1 Z1 GPIO1 must be refer to the circuit , otherwise the mouse will be failed 1 Mechanical Encoder GPIO2 R11 7.5K Note Two option Circuit : 1. GL603USB : Mount R11 (7.5K ohm) 2. GL607USB : Remove R11 (7.5K ohm) VCC 2 DP/CLK R10 680 SW1 LB D2 LED Z1 SW2 MB MIDDLE PUSHBUTTON LIFT PUSHBUTTON SW3 RB GPIO1 Z2 RIGHT PUSHBUTTON IR/PT Optomechanical Scroll Figure 4.8 - GL603USB-A-XP2P 3D3B HDNS-2000 Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. VDD5 Page 17 GL603USB-XP2P / GL603USB-A-XP2P 4.2.3 3D3B with ADNS-2051 Optical Sensor Circuit VCC 1 R1 47K C1 0.1U U2 LB MB RB 1 2 3 4 5 6 7 8 9 LB MB RB VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 Z2 V3.3 18 17 16 15 14 13 12 11 10 SCLK SDIO PD DPIS GPIO2 GPIO1 Z2 3.3V VCC 800 DPI(Hi) 400 DPI (Floating) VCC SW 6MHz Z1 DP/CLK DM/DATA C3 30P S1 C2 30P Y2 VCC GL603USB-A-XP2P C4 0.1U VCC R3 7.5K 1 2 C5 10U JP1 R4 1 1 R5 33 2 2 1 2 3 4 HEADER 4 USB CONNECTOR 0.1U 10U 9 Y1 18.432 MHz 11 2 3 4 5 OSC_OUT SDIO XA XB YB YA GND GND SCLK R_BIN U1 C6 C7 13 7 D1 C8 0.1U REFB XY_LED PD 8 6 15 16 1 14 1 R6 R PD SDIO SCLK C9 10U HLMP ED80 GPIO1 1 1K XGPIO1 R2 2 Q1 2N3906 2 33 OSC_IN Note: Put the C1 (0.1u) as near as U2 Put the C5 (10u) as near as JP1 10 ADNS-2051 Scroll Option S2 2 0 1 ENCODER Z2 XGPIO1 Z1 12 REFA VDD GPIO1 must be refer to the circuit , otherwise the mouse will be failed Mechanical Encoder 1 GPIO2 Note R7 7.5K Two option Circuit : 1. GL603USB : Mount R7 (7.5K ohm) 2. GL607USB : Remove R7 (7.5K ohm) VCC 2 DP/CLK R8 680 SW1 D2 LED LB Z1 SW2 MB MIDDLE PUSHBUTTON LIFT PUSHBUTTON GPIO1 Z2 SW3 RB RIGHT PUSHBUTTON IR/PT Optomechanical Scroll Figure 4.9 - GL603USB-A-XP2P 3D3B ADNS-2051 Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. 2 Page 18 GL603USB-XP2P / GL603USB-A-XP2P 4.2.4 3D3B with ADNS-2610 Optical Sensor Circuit VCC VCC ADNS-2610 Detection C1 0.1U LB MB RB U2 1 2 3 4 5 6 7 8 9 LB MB RB VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 Z2 V3.3 18 17 16 15 14 13 12 11 10 SCLK SDIO 1 R1 47K GPIO2 GPIO1 Z2 3.3V 2 Mount R1 : H/W Detection Remove R1 : Auto Detection 6MHz Y2 C2 30P C3 30P Z1 DP/CLK DM/DATA VCC GL603USB-A-XP2P VCC R3 7.5K 1 2 C5 10U JP1 R6 1 1 R7 33 2 2 1 2 3 4 HEADER 4 HLMP ED80 C6 0.1U C7 4.7U VCC 1K XGPIO1 1 1 R4 100K 2 2 D1 U1 Q2 2N3906 R5 R C4 0.1U R2 GPIO1 1 2 Q1 2N3906 33 1 Y1 24 MHz 2 VDD Note: Put the C1 (0.1u) as near as U2 Put the C5 (10u) as near as JP1 7 USB CONNECTOR OSC_IN LED_CNTL OSC_OUT SDIO REFA GND SCK R8 5 1 1K 3 4 SDIO SCLK 2 Scroll Option S1 2 0 1 ENCODER Z2 XGPIO1 Z1 C8 2.2U 8 Mechanical Encoder ADNS-2610 GPIO1 must be refer to the circuit , otherwise the mouse will be failed VCC GPIO2 Note R10 7.5K 1 R9 680 D2 LED 2 Two option Circuit : 1. GL603USB : Mount R10 (7.5K ohm) 2. GL607USB : Remove R10 (7.5K ohm) DP/CLK Z1 SW1 LB GPIO1 Z2 LIFT PUSHBUTTON IR/PT Optomechanical Scroll SW2 MB MIDDLE PUSHBUTTON SW3 RB RIGHT PUSHBUTTON Figure 4.10 - GL603USB-A-XP2P 3D3B ADNS-2610 Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. 6 Page 19 GL603USB-XP2P / GL603USB-A-XP2P 4.2.5 3D3B with ADNS-2620 Optical Sensor Circuit VCC VCC ADNS-2620 Detection C1 0.1U 1 R1 X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 Z2 V3.3 18 17 16 15 14 13 12 11 10 SCLK SDIO 2 47K LB MB RB U2 1 2 3 4 5 6 7 8 9 LB MB RB VCC OSCO OSCI Z1 D+/CLK D-/DAT Mount R1 : H/W Detection Remove R1 : Auto Detection 6MHz Y2 C2 30P C3 30P Z1 DP/CLK DM/DATA GPIO2 GPIO1 Z2 3.3V R2 GPIO1 1 1K 2 VCC GL603USB-A-XP2P VCC VCC R3 7.5K 1 2 C5 10U JP1 R6 1 1 R7 33 2 2 1 2 3 4 HEADER 4 USB CONNECTOR 7 U1 2 C6 0.1U C7 4.7U C4 0.1U Q1 2N3906 XGPIO1 1 1 R4 100K 2 D1 HLMP ED80 Q2 2N3906 R5 R 33 Note: Put the C1 (0.1u) as near as U2 Put the C5 (10u) as near as JP1 Y1 24 MHz 1 VDD OSC_IN LED_CNTL R8 5 1 1K 2 2 OSC_OUT SDIO REFA GND SCK 3 4 SDIO SCLK 8 C8 2.2U Scroll Option S1 2 0 1 ENCODER Z2 XGPIO1 Z1 ADNS-2620 GPIO1 must be refer to the circuit , otherwise the mouse will be failed Mechanical Encoder GPIO2 1 VCC R9 7.5K Note Two option Circuit : 1. GL603USB : Mount R9 (7.5K ohm) 2. GL607USB : Remove R9 (7.5K ohm) 2 DP/CLK R10 680 SW1 D2 LED LB Z1 SW2 MB MIDDLE PUSHBUTTON LIFT PUSHBUTTON GPIO1 Z2 SW3 RB RIGHT PUSHBUTTON IR/PT Optomechanical Scroll Figure 4.11 - GL603USB-A-XP2P 3D3B ADNS-2620 Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. 6 Page 20 GL603USB-XP2P / GL603USB-A-XP2P 4.2.6 3D3B with PAN101B Optical Sensor Circuit VCC 1 R1 47K C1 0.1U U2 LB MB RB 1 2 3 4 5 6 7 8 9 LB MB RB VCC OSCO OSCI Z1 D+/CLK D-/DAT X2/SCLK X1/SDIO Y2/PD Y1/DPIS GND GPIO2 GPIO1 Z2 V3.3 18 17 16 15 14 13 12 11 10 VCC X2 X1 Y2 Y1 GPIO2 GPIO1 Z2 3.3V C4 0.1U 2 R2 GPIO1 1 1K XGPIO1 1 XGPIO1 R3 R D1 VCC C3 R8 1 7.5K 2 C7 C8 10P 10U JP1 R9 1 1 R10 33 2 2 1 2 3 4 HEADER 4 USB CONNECTOR 3.3V Regulator C13 0.1U XGPIO1 C9 1U 2 U3 GND VI VO 3 C10 10U C11 0.1U C12 1U 6 7 8 9 10 LED VCC 10P Y1 18.432.MHz 4 5 3 2 2 1 1 1 1 R6 10K 2 2 R7 10K U1 1 VSS_LED LED OSCOUT OSCIN VSSD VSSA VDDD VDDA VRB VRT PD SDIO SCLK YB NC YA XB NC XA VAY 20 19 18 17 16 15 14 13 12 11 X1 Y2 X2 Y1 2 GPIO1 VCC 2 Q1 2N3906 VCC PAN101BOI USE ONLY Y2 6MHz C5 30P C6 30P Z1 DP/CLK DM/DATA GL603USB-A-XP2P C2 0.1U R4 10K 2 R5 10K 33 1 PAN101B Note: Put the C1 (0.1u) as near as U2 Put the C8 (10u) as near as JP1 GPIO1 must be refer to the circuit , otherwise the mouse will be failed GPIO2 2 0 1 ENCODER Z2 XGPIO1 Z1 1 Scroll Option S1 Mechanical Encoder 2 R11 7.5K Note Two option Circuit : 1. GL603USB : Mount R11 (7.5K ohm) 2. GL607USB : Remove R11 (7.5K ohm) DP/CLK VCC R12 LB 680 SW1 LIFT PUSHBUTTON SW2 D2 LED MB Z1 SW3 RB RIGHT PUSHBUTTON MIDDLE PUSHBUTTON GPIO1 Z2 IR/PT Optomechanical Scroll Figure 4.12 - GL603USB-A-XP2P 3D3B PAN101B Optical Mouse (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 21 GL603USB-XP2P / GL603USB-A-XP2P CHAPTER 5 BONDING DIAGRAM 5.1 GL603USB-XP2P for 3D5B 20-pin 3 2 1 20 19 18 4 17 5 16 6 15 7 14 8 9 10 11 12 13 Chip substrate should be connected to GND Figure 5.1 - GL603USB-XP2P for 3D5B 20-Pin (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 22 GL603USB-XP2P / GL603USB-A-XP2P 5.2 GL603USB-A-XP2P for 3D3B 18-pin 3 2 1 18 17 16 4 15 5 14 6 13 7 8 9 10 11 12 Chip substrate should be connected to GND Figure 5.2 - GL603USB-A-XP2P for 3D3B 18-Pin (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 23 GL603USB-XP2P / GL603USB-A-XP2P CHAPTER 6 PACKAGE DIMENSION 6.1 GL603USB-XP2P P-DIP and SOP Package 20 0.270 0.250 DIMENSION IN INCHS MAX. MIN. PIN1 1.035 1.015 0.180 0.150 0.140 0.120 0.020 0.016 0.065 0.055 0.090 0.110 0.135 0.125 0.040 0.020 7.0DEG 4.0DEG 0.310 0.290 SEATING PLANE 0.365 0.345 Figure 6.1 - Package Outline Dimension for 20-Pin P-DIP 20 0.419 0.394 0.299 0.291 DIMENSION IN INCHS MAX. MIN. PIN1 0.508 0.496 0.104 0.093 0.018 0.014 0.012 0.05 TYP. 0.004 8 DEG. 0 DEG. 0.050 0.016 Figure 6.2 - Package Outline Dimension for 20-Pin SOP (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 24 GL603USB-XP2P / GL603USB-A-XP2P 6.2 GL603USB-A-XP2P P-DIP and SOP Package 18 0.270 0.250 DIMENSION IN INCHS MAX. MIN. PIN1 0.910 0.890 0.180 0.150 0.140 0.120 0.020 0.016 0.065 0.055 0.090 0.110 0.135 0.125 0.040 0.020 7.0DEG 4.0DEG 0.310 0.290 SEATING PLANE 0.365 0.345 Figure 6.3 - Package Outline Dimension for 18-Pin P-DIP 18 0.419 0.394 0.299 0.291 DIMENSION IN INCHS MAX. MIN. PIN1 0.463 0.447 0.104 0.093 0.018 0.014 0.012 0.05 TYP. 0.004 8 DEG. 0 DEG. 0.050 0.016 Figure 6.4 - Package Outline Dimension for 18-Pin SOP (c)2000-2003 Genesys Logic Inc.--All rights reserved. Page 25 |
Price & Availability of GL603USB |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |