| PART |
Description |
Maker |
| HR31-5.08P-5PC HR31-5.08P-5PD HR31-5.08P-5PDL HR31 |
5 CONTACT(S), MALE, POWER CONNECTOR, SOLDER, RECEPTACLE
5 CONTACT(S), FEMALE, POWER CONNECTOR, CRIMP, PLUG
Interface Connectors for Factory Automation Network
|
HIROSE ELECTRIC Co., Ltd.
Amphenol, Corp.
|
| XECU-FSP150-1H35 |
Intel Xeon IEC-61850-3 Certified Power Automation Computers
|
Advantech Co., Ltd.
|
| MAX6665 MAX6665ASA40 MAX6665ASA45 MAX6665ASA50 MAX |
Fan Controller/Driver with Factory-Programmed Temperature Thresholds
Fan Controller/Driver with Factory- Programmed Temperature Thresholds SPECIALTY ANALOG CIRCUIT, PDSO8
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| ARK-3390 ARK-3390-1S1A1E ARK-3390-1S6A1E |
Intel垄莽 Core垄芒 2 Duo Automation Control System with Two Isolated COM Ports and GPIO
Intel? Core 2 Duo Automation Control System with Two Isolated COM Ports and GPIO
|
Advantech Co., Ltd.
|
| XOPL81 XOPL81025UD XOPL81050UD XOPL81050UI XOPL811 |
FACTORY PROGRAMMED OSCILLATORS
|
EUROQUARTZ limited
|
| XOPL53 XOPL53025UC XOPL53025UD XOPL53025UI XOPL530 |
FACTORY PROGRAMMED OSCILLATORS
|
EUROQUARTZ limited
|
| GP2D150A GP2D150AJ00F |
Factory set trigger point: 15°
|
Sharp Electrionic Components
|
| SI51218 |
THREE OUTPUTS FACTORY PROGRAMMABLE CLOCK GENERATOR
|
Silicon Laboratories
|
| TC53 TC53N3002ETR TC53C1802CTTR TC53C1802ETR TC53C |
The TC53 is a low power voltage detector. Typical supply current consumption is only 1A at an input voltage of 2V. The voltage detection threshold setting is factory-programmed and guaranteed to ±2% accuracy. Threshold settings are a
|
MICROCHIP[Microchip Technology]
|
| R190-130-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R191-074-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R190-112-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
