| PART |
Description |
Maker |
| NE57607GDH NE57607_1 NE57607YDH NE57607 NE57607C N |
Two-cell Lithium-ion battery protection with overcurrent, over- and under-voltage protection 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
Two-cell Lithium-ion battery protection with overcurrent over- and under-voltage protection
From old datasheet system
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| MM1414 |
Protection of Lithium Ion Batteries
|
Mitsumi
|
| AIC1811CCV AIC1811ACV AIC1811BCV AIC1811 |
One-Cell Lithium-Ion Battery Protection IC
|
Analog Integrations Corporation
AIC[Analog Intergrations Corporation]
|
| UB24205G-S08-R UB24205-15 |
LITHIUM-ION/POLYMER BATTERY PROTECTION IC
|
Unisonic Technologies
|
| AIC1821 |
One-Cell Lithium-Ion Battery Protection IC
|
Analog Integrations Corporation
|
| LV51144T |
CMOS IC 1-Cell Lithium-Ion Battery Protection IC
|
Sanyo Semicon Device
|
| UB261 |
1-CELL LITHIUM-ION/POLYMER BATTERY PROTECTION IC
|
Unisonic Technologies
|
| MM1301FW MM1301HW |
Protection of lithium ion battery (four cells in series)
|
Mitsumi Electric
|
| MM1302GF |
Protection of lithium ion battery (two cell in series)
|
Mitsumi Electric
|
| LV51139T |
2-Cell Lithium-Ion Secondary Battery Protection IC
|
Sanyo Semicon Device
|
| MM1294 |
Protection of Lithium Ion Batteries (four cells in series)
|
Mitsumi Electronics, Corp.
|
| LV51137T11 LV51137T |
2-Cell Lithium-Ion Secondary Battery Protection IC
|
ON Semiconductor
Sanyo Semicon Device
|
